Our #6-80 (80 TPI) ultra fine adjusters are available in lengths from 3/8" to 1.5" and are supplied with a 53 HRC .094" dia. tip and provide sub-micron sensitivity making them an ideal alternative to more costly micrometers where position indicated readout is not a necessity. Our ultra fine adjusters are HEX driven and optional knobs and drive types are available. Thread class exceeds 3A.
Note: Kozak Micro cannot guarantee that our screws and bushings will be compatible with screws and bushings sold by other manufacturers.
Item # | Thread Diameter | Thread Pitch | Screw Length Fractional | Ball Tip Diameter | Hex Drive | List Price | Actions |
---|---|---|---|
![]() |
ts6-80-375 | .137 in | 80 TPI | 3/8 in | 0.094 in | 5/64 in |
Sold out
|
![]() |
ts6-80-438 | .137 in | 80 TPI | 7/16 in | 0.094 in | 5/64 in |
Sold out
|
![]() |
ts6-80-500 | .137 in | 80 TPI | 1/2 in | 0.094 in | 5/64 in |
Sold out
|
![]() |
ts6-80-580 | .137 in | 80 TPI | 37/64 in | 0.094 in | 5/64 in |
Sold out
|
![]() |
ts6-80-750 | .137 in | 80 TPI | 3/4 in | 0.094 in | 5/64 in |
Sold out
|
![]() |
ts6-80-875 | .137 in | 80 TPI | 7/8 in | 0.094 in | 5/64 in |
Sold out
|
![]() |
ts6-80-1000 | .137 in | 80 TPI | 1 in | 0.094 in | 5/64 in |
Sold out
|
![]() |
ts6-80-1125 | .137 in | 80 TPI | 1-1/8 in | 0.094 in | 5/64 in |
Sold out
|
![]() |
ts6-80-1250 | .137 in | 80 TPI | 1-1/4 in | 0.094 in | 5/64 in |
Sold out
|
![]() |
ts6-80-1500 | .137 in | 80 TPI | 1-1/2 in | 0.094 in | 5/64 in |
Sold out
|